Please wait while message is being sent...


Felling Heads


Felling Heads

We are a representative of the well-known Finnish harvester aggregates and the Naarva grapples.

Naarvas high quality Finnish harvesting units and trap heads are manufactured by Pentin Paja AB, a family run and owned company. Since the very beginning in 1982 Pentin Paja has concentrated on the development and production of forest tillage machines.

The products can be mounted on everything from smaller agricultural tractors up to major forestry machines. Its fully integrated hydraulic uses the same hoses as the load grapple. The only extra equipment needed is a power cable between the cab and the grapple. Read more about the products at


Naarva K models are reliable combinations of a felling head and a loading grapple. They are suitable for all kinds of clearing and thinning operations. Naarva felling head is quick to install in the place of the crane’s own loading grapple or harvester head without additional hydraulics or hoses.


Naarva Felling Head K20


  • Light and efficient
  • Excellent loading capabilities
  • Effective guillotine cutting, 23 cm
  • Easy installation, no additional hydraulics or hosing
  • Radio control option


Naarva K20 is easy and quick to mount to a tractor, to the place of loading grapple. It can be used to fell, load and cut trees, branches and bushes.


This light weight felling head can cut 23 cm thick trees with ease. The cutting of trees, big or small, does not put a strain on the loading grapple.


Tilt cylinder switches the position of the head from felling to loading. Cutting can be done in both positions. During loading the cutting blade stays inside the frame and is not in the way. 


You don't have to worry about the cable when you have radio control. Plug in the battery and you are ready. Radio control package includes transmitter, receiver, two batteries, charger and an inverter for the battery.


  • Felling and loading of single trees
  • Delimbing before felling
  • Clearing of bushes and roadsides


Strong guillotine
Factory code
Weight  200 kg
Height in felling positions 70 cm
Grapple opening 60 cm
Cutting diameter*,
force and time **

Max. cutting: Ø23 cm

Cutting force: 95 kN

Cutting time: 1.8 s

Required pressure 170-200 bar
Required oil flow 40-70 l/min
Warranty 12 months of 1000 hours
Control system Cable control with 3 buttons
Voltage 12V or 24V

* The max. cutting diameter is approx. 30% lower for hard wood (such as oak and beech).
** With 55 l/min oil flow
All provided values are approximations. The manufacturer reserves the right to make changes in the products. 04/2011.

  • Radio control with various control options
  • Extension boom for 5-8 ton excavator, 1 m reach
  • Cejn Flat face quick couplings
  • Baltrotors rotators
  • Link for the rotator
  • Spare part packages
    • The basic wear and tear part package includes seal kits, rubber dampers and valve connectors.
    • The comprehensive kit includes the same as the basic kit as well as two valves and a complete hose set.